How to set up Smart DNS on a Cisco router

On a phone or computer connected to the router you are configuring - follow the steps below:

Step 1:

Open your browser and visit 192.168.1.1 OR 192.168.0.1 OR 192.168.2.1  (Exact address may differ - Check the sticker on the router itself to confirm)

Step 2:

Log into your router. If you have not changed the default login information and you are unsure - look for a sticker on the router itself for the default login.

Step 3:

Select Basic Setup and make sure Enable DHCP is selected.

Step 4:

Fill in Preferred DNS and Secondary DNS with the following:

  • Preferred  DNS: 66.33.68.1
  • Secondary DNS: 66.33.68.2

Step 5:

Save the configuration and restart your router if it did not do so automatically.


Press here to activate StreamLocator on your network.

Congratulations! You’re ready to stream.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.