How to set up StreamLocator on a Fire TV Device

After completing this guide, please restart your streaming device by unplugging it from the power for 20 seconds!!

Alternatively, if you are looking to connect your Fire TV device to the StreamLocator Hub, please refer to this brief guide instead.

The Recommended Way - StreamLocator App

Head over to the Amazon App Store on your Fire TV device and search for 'StreamLocator'. Install the app, open it and follow the on-screen instructions to begin streaming.

The Manual Way - StreamLocator DNS

Go to Settings -> My Fire TV -> About -> Network and make a note of all the settings there (taking a photo with your phone is an easy way to do this)

fire stick Network

Next, go to Settings -> Network and select your Wi-Fi network. Click the remote's menu button (☰) to forget this network.

how to change network on fire stick

Click on the connection again and enter your network password (SSID). Instead of clicking Connect, click Advanced.

enter wifi password fire stick

Enter the "IP address" as Noted earlier.

enter IP address fire stick

And "Gateway" you also noted in step 1.

enter fire stick gateway

For Subnet Mask, enter 24 if the Subnet Mask value you noted in Step 1 was 255.255.255.0, or 32 if the "Subnet Mask" value was 255.255.255.255.

enter network prefix length on firestick

Enter the primary (DNS 1) 66.33.68.1

And the secondary (DNS 2) 66.33.68.2

Click Next, and you are done.

IMPORTANT - When using StreamLocator DNS switching locations and managing your subscription is done on account.streamlocator.com